No, this isn’t a cast iron thing. Using stainless pans, you can get nonstick effects that, in my experience, far outperform Teflon anyway. The process is called “spot seasoning.” I have cooked crispy, cheesy rice noodles with eggs with zero sticking.
I love my cast iron pans, but stainless is my daily go-to. Added bonus: use 100% copper wool to clean your stainless pan. The copper-coated wool at most grocery stores is problematic; you might get a few uses out of the coated garbage and then it starts shedding metal bits.
In a good non stick pan you can fry an egg without any oil at all, so no, adding a bunch of oil is not a replacement for that
Some people, like me, can’t possibly keep non-stick pans safe. I live on a sailboat, and the effort to keep non-stick pans (even ceramic) safe from damage is disproportionate to the advantages.
There are other cases, such as people who own birds. Overheating Teflon pans can result in PTFE toxicity in birds.
Don’t know who needs to hear this but you don’t need to season stainless steel. You just need to pre-heat it correctly for it to gain non-stick properties.
You have to pre-heat to around 400 degrees Fahrenheit before you put anything in the pan - including oil. You know its good when you drop some water in and it immediately beads up and glides across the entire surface. If it boils and evaporates, the pan is still too cold. If it beads up and starts to glide but freaks out in a certain spot, you have a cold spot in your pan. You’re trying to achieve the leidenfrost effect
Keep in mind that in a lot of dishes you actually want some of the food to stick to the pan and become [frond].(https://www.thespruceeats.com/all-about-fond-995681) Then you deglaze it later with some kind of wine or stock.
Stainless steel is perfect for this kind of cooking. I’ve been using it exclusively for years. Its versatility and low maintenance is why all the best kitchens in the world use it.
Fond. Fronds are parts of a tree.
Thanks for the tip about preheating! I bought a set of Allclad mostly so I could go from stove to oven to finish, but haven’t bothered to learn how to correctly cook eggs in them (have a carbon steel crepe pan that is the designated egg pan, highly recommend). The rest of the reason for them is that they are nigh on unfuck-up-able.
Even easier, heat the stainless steel pan until water balls up and skitters/rolls across it instead of evaporating.
Add oil and you can fry an egg on that pan
Sis anyone else watch the video? I was waiting for his”spot seasoning method” until I saw just how much oil he used to cook and egg without sticking to his wok. Dude lost all credibility right there, and I quit watching
“the egg glides freely…”
the egg does not, in fact, glide freely. it’s also fucking burned to a crisp and there’s like an ocean of oil in there. terrible, terrible video.
“Floats…”
This is how you cook with stainless. Get a high smoke point oil, get the pan and oil plenty hot, the put the food in. It immediately sears the contact surface and this is what prevents sticking. This is also why you slowly place food in the pan (other than to avoid spatter), it gives a little extra time for this to happen. Otherwise you gotta wait for the surface to brown and hopefully unstick, which might work for things like chicken or the skin side of fish, but anything liquid like eggs or super soft like the fish meat will have a good chance of sticking.
IOW, just do what chefs usually tell you to do with stainless and get it hot with the correct oil. Best odds of not sticking. Modern non-stick pans are pretty good if you obey the rules about using them.
Yeah plus when cooking some foods in stainless (such as meat) you want some sticking so you can build a fond which you then deglaze to make a pan sauce. Carbon steel is less ideal for this because the seasoning will react with acids such as vinegars, wines, or citrus which are all common ingredients in pan sauces. While a well-seasoned carbon steel pan can survive a deglaze with vinegar the dissolved seasoning can ruin the flavour of your pan sauce.
This is how you cook with stainless. Get a high smoke point oil, get the pan and oil plenty hot, the put the food in.
This is not, strictly speaking, true for eggs.
I’ve cooked eggs in stainless nearly every day for the last couple of decades. I can crack a few eggs in a properly prepared cold pan, and still get non stick effects, such that the food will slide right out without using a tool.
The level of heat which would require a high smoke point oil is generally much too high for cooking most styles of eggs anyway.
People should use whatever method works for them, I’m not judging, but high heat is not required for most styles of eggs.
But that’s how you cook an egg. Every Chinese chef does it this way no matter the pan.
The first year I lived in China a tutor of ours offered to cook eggs at a breakfast and the American girls who lived in the apartment agreed. They were horrified when she heated an inch and s half of oil and deep fried those suckers
This is the way!
I have that same wok. You need a lot more oil for a flat bottom wok than a round bottom because the flat bottom doesn’t let the oil pool to the middle.
You absolutely can get nonstick eggs with a stainless steel frying pan and a small amount of oil but you need to actually practice heat control and cooking technique. It’s actually much easier with butter because the water in it will begin to fizz and you just need to wait for the fizzing to stop and the pan will be just about hot enough.
You still need to use the right heat setting which is specific to your stove and pan, so practice is needed but you can get a good feel for it by how quickly the butter melts. If it melts rapidly and gives off a lot of steam and begins browning then the pan is too hot (unless you want to do a crispy egg, but that should be done with oil instead of butter which has milk solids that burn and turn bitter).
slightly wet your fingers and flick little drops of water into the oil for the same “fizzy” test for regular oil… it’s not enough water to be problematic, but plenty enough to give you a light to heavy fizz to tell you how hot the pan is
I have used the water drop trick occasionally. Usually I cook an egg at higher temperature though. I wait until the oil smokes and fry it to get a golden brown crispy bottom. My favourite egg to throw on a noodle or rice bowl.
I wait for water beads to dance arund on metal and then turn down the heat and wait a few mins. I put on oil and roll it around to ensure every pore is hit and then slap the egg on. That way you can use lower temperature.
Ive found when oil shimmers it is hot enough to not stick, but its not reliable.
Generally my crispy egg method causes the egg to stick but then it releases!
You can absolutely cook an egg without sticking without needing that much fat and without the egg burning.
Can someone link to the actual fucking article describing how to do the spot seasoning method?
Recipe:
1 egg
3/4 cup of your favorite oil
1 medium banana
1 pinch lemon zest
Put oil in pan over medium high heat until oil just smokes, allow to smoke for 15 seconds, then reduce temperature to “egg making temperature”. Add egg. Burn the shit out of that innocent bastard and push it around while repeating “egg slide freely!”. Remove your egg with a crispy, brown bottom and wet, runny whites from the skillet. Reserve oil.
Into one large coffee mug, pour your oil, add lemon zest.
Last, throw all this in the trash with your Teflon skillet, and eat the banana.
Howtobasic is that you?
Certainly about as funny.
I keep seeing people urging to go back to cast iron or stainless steel, but when I left the nest 5 years ago, I picked up ceramic pans, and you can use them the same way as teflons and I have yet to lose the nonstick.
Some people, like me, can’t possibly keep non-stick pans safe. I live on a sailboat, and the effort to keep non-stick pans (even ceramic) safe from damage is disproportionate to the advantages. Also, I am away from resupply for long periods of time. If my pan gets damaged, I can’t just hop down to the store to replace it.
Don’t use bar keepers friend to clean them. That fucked up ours.
Could be cheaper enamel. Le Cruset specifically mentions it in their cleaning instructions
Bar Keeper’s Friend, or a paste of baking soda and water, also comes in handy for cleaning tough stains, oil residue and marks on your Dutch oven as well
I use it on my enameled dutch oven all the time and I’ve never had an issue.
Le Creuset enameled cast iron isn’t the same kind of thing as the ceramic nonstick the person upthread was talking about.
Don’t those use very similar coatings as Teflon?
I need my pans that need to be treated like a princess and then fail anyway in a few years and need to be thrown and replaced. I need to keep doing it cause those poor people at teflon plants cant have a job creating one of the most polluting chemicals out there
Also for skillets you can just buy ceramic. As long as you don’t let them sit with food on them they stay pretty non-stick for years.
Some people, like me, can’t possibly keep non-stick pans safe. I live on a sailboat, and the effort to keep non-stick pans (even ceramic) safe from damage is disproportionate to the advantages.
Huh, I haven’t treated my ceramic skillets special at all, just rinse 'em out when I’m done and throw 'em in the dishwasher, or if I have to hand-wash I can just scrub them real quick since they’re not nasty with food gunk all over them. To the best of my knowledge they don’t require special treatment, I only suggest not letting them sit with food on them because that’ll make anything harder to clean up.
The first hazard to my pans is clunking around while at sea. This is mitigable by putting a cloth in the pan to protect it from other pans. My partner made a bag to hold our ceramic pan. But then the bag got nasty moldy, as porous things always do when sitting in a compartment on a boat. Then our silicone spatula wore out, like they invariably do; I’ve had the same stainless cooking utensils for going on 30 years. The ceramic pan was given away at our next port.
And ceramic pans still wear out with use, regardless of the level of care. They just last a bit longer than traditional non-silicon nonstick pans.
Oh yeah I didn’t think about the fact that it’s porous, shit. Yeah I’ve had my ceramic skillet set for like 15 years and never done anything special with them, but also no salt water and stuff growing on every available surface. Fair point.
Don’t properly nonstick pans mostly not use teflon anymore anyway?
They still use a chemical that’s part of the PFAS family, teflon is just one of those chemicals under the PFAS umbrella. Unless you mean ceramic cookware.
For some info into this chemical PFAS
“a stainless… steel… WOK.”
I’m going to need a supercut of this guy saying “WOK”.
Bought a carbon steel pan - never looked back, it is excellent and lasts forever!
I have a well seasoned good quality one that makes eggs as well as a nonstick pan. Took time to get to that point though. Sugary American bacon is the surest way to end up having to reseason it though.
Got one too, searing steacks is wonderful but I sure can’t make eggs without garbling them!
my seasoning flaked off and it became metallic appearance. I was struggling with obtaining stable seasoning, but found a reddit post that suggesting Blueing process. You heat-up your clean wok a lot with no-oil the iron reacts with oxygen to form magnetite Fe3O4 which holds seasoning much better. After you blue your wok, you season it by heating up some oil, but generally it seasons itself diring usage. If something starts sticking, more oil and more heat usually does the job.
When my cast iron started flaking, it was because I was being too gentle with it. Once I began to suspect that that was the case, I decided that from now on if this layer of seasoning isn’t strong enough to withstand my copper scrub pad, then it’s not worthy to be the foundation for the next later of seasoning. I’ve had much better results with this approach.
Teflon pans are just light, cheap and carefree. That’s why everyone buys them
I love how Teflon pans perform. However, some people, like me, can’t possibly keep non-stick pans safe. I live on a sailboat, and the effort to keep non-stick pans (even ceramic) safe from damage is disproportionate to the advantages. Also, I am away from resupply for long periods of time. If my pan gets damaged, I can’t just hop down to the store to replace it.
There are other cases, such as people who own birds. Overheating Teflon pans can result in PTFE toxicity in birds.
Some thought needs to go into their care, though
Idk don’t use metal utensils is the major one. What pan doesn’t need some consideration?
If you’ve ever lived in a house with others, someone is going to use a metal utensil. Its unavoidable. Better to just not have cancer causing stuff in your kitchen
I’ve never lived with such mouthbreathers. It’s definitely avoidable.
Spoken like someone very ignorant of their privilege
Privilege of not living with absolute dimwits. How rare much it be in some places. I feel for you
Yes. Poor people often dont get to choose their housemates. The landlord does.
Link to article?
