+1. Honestly, any of the three can be a recipe for disaster, especially when messing with DVW.

Of all of them, gas is the one that can be explosive, although crossing electrical pairs is a big risk too. I bought my house from an electrician, and you probably would not be amazed at the number of 20A breakers on 14awg branches. There were at least 3 I’ve swapped back to 15A first time I cracked open my panel.

To every man his domain, I say. Myself, I grok electric and plumbing. I hate messing with gas.

We all go to a lot of the same parties.

In fact, yes.

I forget exactly how, but basically roll out some uncased sausage into a thin sheet which you divide and use to wrap some peeled soft boiled eggs. Then the wrapped eggs undergo a traditional flour-egg-crumb dredge before a quick deep-fry in 365°F neutral oil to a desirable shade of brown.

From the pic, I’ll wager I cut in some Parmesan cheese (green can) and corn meal into the dredge. Probably also some salt, pepper, and herbs.

There are some good online recipes. I haven’t published one, myself, but I should.

Mang… U do u.

o7

Ketchup? Hear me out…

Dijon mustard & Old bay.

Or Sriracha…

Or Frank’s Buffalo sauce…

Or, Heinz cut with mayo, mustard & Worcestershire…?

Just… Please, no. Not just the ketchups.

Congratulations!

I’ve had my place 20 years. Here’s a couple of tips:

If you’re not already in a fixed rate loan, refi into one as soon as its feasible for you.

The Home Depot 1-2-3 series books will save you thousands in basic troubleshooting and repairs. YouTube is really good for general handyman advice too. Caveat: learn your limits and don’t take on anything you don’t know ypu can see through. Several hours’ research is generally all you need.

Be judicious about home warranties. They’ll spam you with FUD. Just hang out at a local trades bar and chat with the regulars. You’ll learn a lot.

Electric and water generally* pretty are easy. Don’t mess with the gas lines.

If you DO undertake your own repairs, don’t cut corners and leave it for the Next Guy. That Next Guys will inevitably be you.

Nothing will be plumb, square or true. You learn to deal with it.

If you like to use rich colors in your décor, learn about tinted primers, especially when dealing with red paints.

Equity is Capital. Don’t touch it except for capital improvements to the structures & grounds, and even then be judicious. I’m talking new roof, new sump, kitchens & baths. Do not usenit to pay off consumer debt or college loans. No matter how tempting.

Really, Don’t Touch The Capital.

Live there for you. Its your house. Make it your personal retreat from the world, and set it up how you like it. Don’t worry about resale until it’s actually time to sell.

Again, congratulations and good luck!

–
* for basic repairs, receptacle replacement, and the odd new branch. Know your limits.

It’s not DiGiorono, it’s Dispensary!
– stolen from Charlie Berens

You, uh… You do a newsletter?

For me it depends in whether the publisher has a .deb file available or not. If there’s a downloadable deb file, I just install that through apt/dpkg.

I try not to use custom repos anymore because they rarely keep up with the named releases and can introduce library conflicts.

If I can only get a tarball of the precompiled binary then I’ll unpack it in /opt and drop a soft link to the main binary in /usr/local/bin. This is how I handle Firefox and Thunderbird at least.

Otherwise, there’s containers (Unif controller, for example) and flatpacks as a last resort.

I personally hate building and installing from source, but I’ll do that if I absolutely have to.

Thanks! I hate this. 🖤

I have an ecobee thermostat that I manage locally over WiFi using the HomeKit integration, but I’d stop short of recommending it to new users.

1. Ecobee used to support developer access to their cloud API for controlling the thermostat and collecting efficiency data, but stopped issuing new API access tokens in the last couple of years. They have no plans currently to reopen developer access. If you have a token then the ecobee integration works fine, but if you don’t you’re stuck with HomeKit.
2. The thermostat requires 24V from the furnace to run the display and wifi stack. They provide an adapter you can install if you have available free leads at bother ends of the thermostat control cable. I had to splice a new wire onto the 24V transformer in my furnace since it didn’t have a 24V common terminal on the control block. It wasn’t hard to do in the end, but it was a lot of research.
3. Some advanced thermostat features require the app. I am not sure whether the app uses cloud or local control when on the same WiFi.
4. Not all features are available through the HomeKit integration. I can change the thermostat mode among Auto/Heat/Cool/Off, manage the blower fan mode and manage the heat/cool set points.
5. Data logging. The damned thing does log activity back home, and the data is only available in the app or on thr web portal.

Other than that, Mrs Lincoln, how was the show? I haven’t been unhappy with the ecobee. The HomeKit integration works fine, and I get enough data from the native HA history to track and manage my energy demand. I shied away from Honeywell because my last Honeywell thermostat-- the one I used just before the thermostat I replaced with the ecobee-- tended to cycle my furnace too fast during cold snaps, and it would put the system into thermal protect mode. There was no way to widen the hysteresis (or modify the duty cycle) except by manually setting the temp high, run the house up to that temp, and then lower the setpoint and let the house take longer to cool.

ETA: the ecobee a decent thermostat and I’m happy enough with it overall. It has “spousal approval” accreditation as well. I wish it checked more boxes for me*, but it was essentially free through a power utility program. Its a worthy upgrade for me, but YMMV.

* namely, Z* protocol local control and continued cloud API access

N… No?
No.
No, I’m pretty sure I haven’t.

Never going in with a Sicilian when death is on the line?

Termux (on F-droid) is a userland environment that runs on top of your Android device’s kernel. It has Debian/Ubuntu-like package management system that pulls from repos maintained by the termux team. If the package is available for aarch64, its probably available in the termux repos. Its not so much of an app as it is an alternate userland that runs on top of the same kernel, but can interact with Android a couple of different ways.

The main Termux app gets you a basic command line environment with the usual tools included in a headless Linux install. From there you can select your preferred repos, do package updates, installs, etc, just like on a desktop or laptop. You could even install a desktop environment and use RDP to access it.

Then there are some companion apps that are useful:

• Termux:boot is like a primitive rc.d feature that executes upon boot up any scripts found in the termux ~/.termux/boot directory. You could use the feature to launch an SSH server, or perhaps start your syncthing service when the phone starts up.
• Termux:Tasker is a Tasker plugin that allows Tasker to launch scripts in .termux/tasker based on whatever triggers or profiles you define in Tasker. For example, stop or start selected services when connected to your home WiFi
• Termux:API is a set of termux utilities to interact with the Android API, and do things like send messages, interact with the camera or battery, and manipulate system settings.

So you could install the syncthing package in Termux and (after setting up Termux access for your internal storage) configure it to sync folders from your phone to wherever syncthing syncs. You’d set up a start script under Termux:boot to launch it when your phone starts, or Tasker to start/stop the service on your home WiFi.

For the F-droid enabled users, it seems there’s a Syncthing app in the Termux repos:

~ $ apt show syncthing
Package: syncthing
Version: 1.28.0
Maintainer: @termux
Installed-Size: 26.4 MB
Homepage: https://syncthing.net/
Download-Size: 7857 kB
APT-Sources: https://packages.termux.dev/apt/termux-main stable/main aarch64 Packages
Description: Decentralized file synchronization

Hello, third rail. i wasn’t expecting to tangle with you today.

It’s from Latin in- (meaning “in” or “on”) and dorsum (meaning “back”). Indorse comes to English through medieval Latin, and changed forms in the 15th century to endorse, around the time the roots of our modern court system took roots in Florence during the Inquisition.

The Florentine republic relied heavily on maritime trade, and so the court system was generally modeled around adjudication of Maritime law. Using the older Latin form lets creditors and courts know that the Sovereign is asserting Commerce law, the Law of the Land.

Am I making this up? Maybe.

I think that’s the Gen2 or Gen3? I had a couple of them over a few years, and I’m ashamed to say I’m not sure whether I actually had the one in the photo, or the version just prior to it.

In the eye of our creators, we are all donuts.

Probably all of them, at one time or another.