Room-scale DnD dungeons anyone?

It looks like there are multiple layers printed without feeding filament, which causes these frays to build up. Could it be that the filament clogs after this layer? Or do you see that filament still properly feeds later? This could happen for example due to heat creep and the filament getting too warm/soft in the extruder to properly feed or you trying to feed too fast.

The layoffs are finally paying off…

You might be able to make it much stiffer by adding more of the arms parallel. The force should be consistent when you tighten multiple of them with one screw.

You have to choose the one without AMS color changer: https://us.store.bambulab.com/products/a1-mini?variant=41513493627016 It should be 199$

Bambu A1 Mini is on sale. Add a 0.2mm Nozzle and you have a perfect machine for miniatures

You should ask the creator. Maybe he’s unaware that people can’t post makes anymore or it’s a setting they can change.

This makes only sense, given that they have a dedicated investors.broadcom.com page but no security.broadcom.com you can see where their focus is.

Make the movements visible in preview. Most probably it makes the total movement shorter when switching between parts.

For services I host I really like this EULA:

If the Provider of the Service (the “Provider”) needs a place to crash and you have a sofa available, you should maybe give the Provider a break and let him sleep on your couch.

If you are caught in a dire situation wherein you only have enough time to save one person out of a group, and the Provider is a member of that group, you must save the Provider.

THE ACCESS IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO BLAH BLAH BLAH ISN’T IT FUNNY HOW UPPER-CASE MAKES IT SOUND LIKE THE LICENSE IS ANGRY AND SHOUTING AT YOU.

Edit: original found here: https://github.com/pirate/security-growler

Lower speed between the holes because of low acceleration. Because of this more heat is brought into the layer which makes it more shiny. Your nozzle doesn’t reach the same speed on a 20mm line as it does on a 200mm line.

The root cause has been fixed in 2.2.2: https://www.phoronix.com/news/OpenZFS-2.2.2-Released Block cloning has not yet been reenabled as default though.

Is it only me or does that CoreXZ kinematic not make any sense? They gain the ability to move in Z in high speed but add ringing etc. in Z direction.

https://m.xkcd.com/583/

https://ittavern.com/troubleshooting-asking-the-right-questions/

Prints can be scraped using microplane cards (can be made yourself from spring steel with a hammer). I really like this method as it leaves a smooth surface.

Explanation: https://m.youtube.com/watch?v=a4e9JJkinvk