Fuck yeah, public transit - Right in my veins, lets go.

But for right now, there is ZERO public transit infrastructure where I live, which is only about 20-30 minutes to a medium-sized city’s downtown. And when I say ZERO, I mean ZERO. We don’t even have busses here. No trains. NOTHING. We don’t even have sidewalks on most roads - if you want to walk, you’re literally walking in the road. I used to ride a bike to work a long time ago - I can’t even count the number of times I’ve had shit thrown at me by shitbag rednecks as they zoomed past in their lifted pickup trucks.

The local governments’ answer to all this is “If you don’t have a car, fuck you.” Cars are literally the only option. If you don’t have a car or a driver’s license, you better find somebody who does and give them gas money, or consign yourself to paying for Uber/Lyft anytime you want to go anywhere. It’s straight-up dangerous to travel any other way around here.

I bought a cheap used Dell R710 on Facebook marketplace for like $100 or so, as well as an ups, rack, 10g switch, etc, from various other sellers. All told, I’ve got about $500 in my server setup.

Installed proxmox on it. It’s “free” if you don’t buy a license. You just have to put up with a little nag screen when you open the control panel but it still works 100%, much like winrar.

Works great.

Edit: just realized this is in c/selfhosted AND I misunderstood the post. I’m gonna leave it here just on the off chance it’s useful to somebody, but I acknowledge it’s not what you’re looking for.

And in rural areas, it’ll be called “skeet shooting with prizes”. I know exactly what my redneck neighbors are like…

FWIW, I’ve used privacy.com a few times. Works pretty well.

It’s coming. Slowly. But it’s coming.

https://dragon863.github.io/blog/echoroot.html

And I was making a joke about the D&D spider goddess.

But the word is “loath,” which has an accepted alternate spelling of “loth”. “Lolth” is the Dungeons and Dragons spider goddess, commonly worshiped by Drow.

What? This is system programming, not web development.

I thought for sure this was gonna be “Everywhere at the End of Time”.

If you’re not familiar, it’s a 6 hour audio piece that simulates the descent into dementia ending in the complete loss of oneself and eventually death.

Knowing what it is going in, it’s terrifying to listen to.

The whole thing is on YouTube, posted by the creator without ads, but I’m too lazy to go find it and don’t want the piped link bot to kill me in my sleep.

It’s a point raised in the movie. There were no people in the buildings because the bombings were done at night and the only people that would be in the buildings were a part of the group and knew to be out of them.

You are a fucking hero. I couldn’t figure out why my Roku TVs were still able to get ads after blocking everything.

Lot of jargon in this that most of us don’t understand. Dnm? Ddg? Can you explain it more clearly for us general admission ticket holders?

Also, thoughts on shrooms?

I simplified a bit. But it’s easy to bork the cable in the process, and it’s also possible the cable didn’t follow standard wire coloring.

Here’s the step by step process for anybody who wants to do this but doesn’t know for sure what to do.

You will need a razor blade or wire stripper and a wire cutter, as well as a roll of electrical tape.

Also it should go without saying, but unplug both ends of the damn cable before you start. And if you’re using a blade, please be careful not to cut your finger open. Paying $800 for stitches in your finger hurts, defeats the purpose of being a cheapass and modding a cable to save a few bucks, and gets blood everywhere.

1. Verify that the usb cable is a CHARGE AND SYNC cable. A charge only cable will not work.

2. With your razor blade, make an incision into the usb cable about 6 inches from either end. Don’t cut too deep. Only go deep enough to cut the outer jacket. The cut should be slightly longer than your tape is wide. If you have a wire stripper, strip about a 3/4 inch section of the cable about 6 inches from either end.

3. If using a blade, cut around the jacket at both ends of your incision and peel off the jacket between your cuts. You should have about 3/4 inch of unwrapped cable.

4. If there’s a wire mesh wrapping the inside of the cable, cut SOME of the mesh, being careful to ensure that the mesh is still connected on both ends. If there’s a foil wrapper, find the seam and peel it back to expose the inner wires. You can cut the foil if necessary, but do not remove it entirely. Ensure that SOME of the foil and/or mesh is still attached at BOTH sides of the exposed section.

5. The inner wires should now be exposed. There should be 4 wires - red black white and green. There might also be a 5th wire with no insulation at all, but this won’t be in all cables. It’s okay if it’s missing. However, if you don’t see ALL of those 4 colors or see different colors STOP. Tape the cable back up and get a different one. If you only see TWO wires, you have a charge only cable and it won’t work. Tape it back up.

6. Clip the red wire TWICE, about an 1/8th inch apart. There should be a gap in the wire now if you line the ends up. DO NOT cut anything else inside the cable. The black white and green wires MUST remain intact for the cable to function.

7. Bend the red wires up and out of the jacket. Close up the foil and/or mesh and wrap ONLY the exposed portion of the cable with ONE layer of electrical tape, leaving the red wires sticking up on either side of the tape. It’s okay if some metal is exposed on either side of the tape, but the red wires should be able to lay down on it without the ends touching anything metal.

8. Lay the ends of the red wires down so that the ends are laying on the tape. The metal inside the red wire should NOT contact anything else that’s metal in the cable.

9. Wrap the whole opened section of the cable with electrical tape to an inch or two on both sides of the open section.

Plug it in and give it a try. You should have data-only usb cable that doesn’t deliver power now. Mark or label the cable in some way so that you don’t lose your mind trying to figure out why this damn usb cable doesn’t charge your phone when you pull it out of a box of random shit 5 years from now.

I bought a X1C and have never leveled it once. Everything is completely automatic, and I’ve never had a failed print.

If I can see that the print quality is starting to go down (and by that I mean I can see a little ringing or something), I just hit the calibrate button and it does everything on its own with zero intervention besides the initial button.

Or just sacrifice a usb cable - carefully open the wire jacket, snip the red wire, then tape it back up. Easy peasy done in 2 minutes.

I had more money for food and started eating out more and got a lot fatter. Now I’m trying to improve my health by not eating like an asshole anymore.

I also got access to more credit and promptly ran up a bunch of debt. Now I pay $1000 a month in minimum payments and I’m working on chipping the balances down, but at least my car is paid off now.

I also bought a house, which turned out to be the best financial decision I ever made. Got locked in at 2.9% before the market lost its damned mind. Now my $145K house is worth $330K. I mean, on paper at least, but it’s a useless number because everything else has gone up too, so selling and buying something else would be a wash price wise, but my interest would go to like 7%. But I only pay $908 a month for my mortgage, escrow, and pmi, so I’m doing better than paying $2K/mo for rent to line somebody else’s pocket.

So a handful of ups and downs. Best advice, control yourself - eat right and don’t spend money just because you have it. Sure, a new couch, etc might only be $100/mo, but all that shit adds up and you’ll end up with a 6 figure salary and a cabinet full of ramen noodles. Ask me how I know.

FWIW, I run proxmox at home, and I friggin love it. It’s really not hard at all.

No online store. I just do it as a hobby. Feel free to dm me whenever.

There’s a pen sub? I was on r/penturning on that other place.

The bolt action is wenge with a oil/wax blend friction polished finish. I’m asking $100 for it with free shipping to anywhere in the continental US. It comes with a free black faux-velvet sleeve for safekeeping.

I will ship internationally, but that’s not included, sadly.

I still have the third one available. I’m asking $50 for it, with free shipping to the continental US. It’s padauk, canarywood, katalox, and leopardwood with an aluminum inlay and a cyanoacrylate finish…