First time printing with TPU. Another problem I had was that it didn’t stick to the textured print bed, had to go for smooth PEI which I read (and now can confirm) is not ideal. Would satin be better?

  • TwanHE@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    All depends on your extruder. A decent extruder should have no problems with 200mm/s+

      • TwanHE@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Just because you can’t get it working doesn’t mean it’s impossible. Vez is printing tpu benchys under 6 minutes, so it’s clearly possible.

        • MrSlicer@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I don’t know what you are talking about. I make real things out of tpu that get used everyday for years. I don’t know who pez is and I’m not interested in bench speed runs.

          • TwanHE@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I get that speedbencys aren’t functional objects but as long as you’re not running out of flow rate the material properties shouldn’t differ between 20mm/s and 200