Im very new to 3d printing and this is my first time using anything other than pla. So far all of my prints are lifting off the bed at the corners. They start off looking beautiful. No stringing, great adheasion, etc. But after a few layers, they start to come off. Especially on larger prints.
Heres my setup: Ender 3 pro with skr mini e3 v2 Creality Ender 3 glass bed upgrade Bed temp: 90C Extruder temp: 240C Nozzle diameter: .4 Layer height: .2 First layer: .45 Speed: 60mm/s Slicer: Silc3r
I realize that asking this question is like asking WebMD to dianose my sniffles, cause it can literally be anything, but Im hoping someone with more experience can give me some pointers on what works for them. Thanks yall!
i’ve got basically the exact same setup as you, other than flipping the bed upside down to use the smooth side, and having the base ender3 instead of the pro (only difference there, given we’re both on mini e3v2’s is the y axis rail).
a little spritz of aquanet on the nontextured side, and blocking out potential drafts can go a long way. also your first layer thickness is larger than your nozzle diameter, try bringing that down to at most 3/4ths, or 0.3 in this instance.
all that out of the way, i’m printing 230/70 extruder/bed with petg and having no real issues to speak of.