Im very new to 3d printing and this is my first time using anything other than pla. So far all of my prints are lifting off the bed at the corners. They start off looking beautiful. No stringing, great adheasion, etc. But after a few layers, they start to come off. Especially on larger prints.
Heres my setup: Ender 3 pro with skr mini e3 v2 Creality Ender 3 glass bed upgrade Bed temp: 90C Extruder temp: 240C Nozzle diameter: .4 Layer height: .2 First layer: .45 Speed: 60mm/s Slicer: Silc3r
I realize that asking this question is like asking WebMD to dianose my sniffles, cause it can literally be anything, but Im hoping someone with more experience can give me some pointers on what works for them. Thanks yall!
The other advise here is good. I’ll also add that PETG really likes to pop of the bed if the temp changes. Even the breeze of someone swiftly walking by the printer could be enough to get a corner to lift.
An enclosure or tent may help; as a test maybe try a big cardboard box set over it carefully while printing.