Heard I can use acetone for PLA, but not for PETG. Glued a joint and there is residue extruded and unfortunately it’s a very shiny / translucent PETG. Any suggestions for cleaning up thin white residue stain from the cyanoacrylate?

  • Aux@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    7 months ago

    For future projects I’d personally recommend crystal clear epoxy. It takes a lot of time to set (40+ minutes) and even more to cure (24-48 hours), but the result is awesome.