• thejevans@lemmy.ml
    link
    fedilink
    arrow-up
    25
    ·
    1 year ago

    Then they could have released an open standard instead of creating a proprietary connector.

    • beefcat@beehaw.org
      link
      fedilink
      arrow-up
      15
      ·
      edit-2
      1 year ago

      the adc connector was mostly proprietary in the sense that nobody else used it. third party manufacturers had no problem making adapters and cables without apple’s permission, as evidenced by the the belkin dongle this article is talking about.

      what you’re really asking for is an industry standard, which is different from an open standard. however, an industry standard requires the industry as a whole to buy in to it. if they say no, but you still want to solve a problem that their existing standards do not, what do you do?

      industry standards also do not typically appear overnight. usually, companies put out multiple solutions trying to solve new problems, and eventually the industry coalesces around a preferred solution. USB was introduced in 1996 with full support for mice and keyboards, but it took nearly a decade to become the de facto connector for mice and keyboards.

      • thejevans@lemmy.ml
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        I am asking for specifications to be released without patents or have patents signed over to an organization like VESA. Whether it becomes popular or not is another story.

        • beefcat@beehaw.org
          link
          fedilink
          arrow-up
          8
          ·
          edit-2
          1 year ago

          i don’t think adc was encumbered by patents, at least not in any way that prevented other manufacturers from making use of it. it wasn’t locked down behind special handshakes and a certification program like lightning is. it used the same signaling protocol that dvi ended up using, which is why passive adapters like the belkin one above were possible. the additional pins on the connector were used for power and usb. the specifications were freely available, and monitors, gpus, and kvms were released that used the connector in the late '90s and early '00s.

          the problem people are haivng is that this connector did not see wide use, so cables and adapters are hard to come by 25 years after the fact.

          putting vesa in charge wouldn’t change anything here unless vesa decided to ditch dvi and push this connector instead. however, that probably wouldn’t have happened, because their constituents (most wintel pc makers) would have preferred the cheaper solution of not bundling video, power, and usb in a single cable.

          • jarfil@beehaw.org
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            i don’t think adc was encumbered by patents

            25 years after the fact.

            If it were, they’d likely be expired by now.

            I wonder if an adapter could be made some “DIY” way, if it needs to be active, it could be a fun project for someone into FPGAs.

            • beefcat@beehaw.org
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              1 year ago

              the adapter is passive since both connectors use the same signaling protocol

              the problem is that designing tooling to manufacture a custom connector at scale is expensive, so nobody is going to do that until they know there is enough demand to at least cover the upfront cost of designing that tooling and manufacturing a bunch of these.

          • deegeese@sopuli.xyz
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            You’re missing the point that if Apple had just given it to VESA, it would have become the de-facto standard instead of DVI because other companies would rather reuse ADC than design DVI from scratch.

            • beefcat@beehaw.org
              link
              fedilink
              arrow-up
              5
              ·
              edit-2
              1 year ago

              i think i laid out exactly why that most likely wouldn’t have happened

              i don’t think there is any reason vesa couldn’t have adopted it if they wanted, the connectors are already extremely similar. the problem is they didn’t want a connector that also handles power and usb, because that would have raised costs for pc manufacturers

              • deegeese@sopuli.xyz
                link
                fedilink
                arrow-up
                1
                ·
                1 year ago

                As a consumer, would have been pretty cool if DVI carried USB too.

                Instead, almost every monitor bundles a USB hub that needs an extra cable. Not sure how that saved manufacturers money.

                • beefcat@beehaw.org
                  link
                  fedilink
                  arrow-up
                  6
                  ·
                  edit-2
                  1 year ago

                  you have to remember this was 1998, and apple was the first company going all-in on usb for peripherals, using it to replace the aging apple desktop bus.

                  the cost concern also has more to do with low end machines in that time frame. if the connector included it, then any devices that used it would need usb support. at a time when usb was still brand new, and most pcs that had it shipped with controllers that only supported one or two ports.

            • anlumo@feddit.de
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              ADC is incredibly inconvientient, because it doesn’t support hotplugging. It also requires the computer to contain a power supply for the screen.